Double Glazing Seal Repairs
If the seals of double glazing windows are broken, they can cause damp and mould. This can damage the frame and wall surrounding it and impact your health.
Fortunately, the majority of uPVC windows can be repaired with sealing, not replacement. A glazier is usually able to clean the frame of the window and the glass and then apply a new layer of sealant, and smooth it.
Water Leaks
Window seals are designed to keep water from your home. As they wear out, water may get into your windows. A window that leaks isn't only annoying but it can cause serious damage to the surrounding structure of your home. It is crucial to spot the issue early and get it fixed by a professional before it gets any worse.
The source of leaking windows can be found in the glass, but rather on the frame or sill. A leak in this region is the most typical indication of a damaged window seal. It can be caused by damage to the window seal due to weather or aging, worn out caulking, or even an obstruction to drainage that results in the accumulation of water or ice.
Another common sign of a failing window seal is water appearing between the panes of double-glazed windows. This is not as dangerous as a leak of water since the water doesn't travel far enough to reach into your home. However, it could indicate that the inert gas that is in between the panes has been released, which can reduce the insulation value of your windows.
The final common indication of a failing window seal is condensation that forms between the panes. It could be the result of the window seal failing, or it could be the result of an unforgiving climate in your home or an issue with the glass. It's not just a nuisance however, the condensation could result in mildew and mould growth within your home. It can be very difficult and costly.
It's time to inspect your double-glazed windows when you notice these signs. Repairs or replacements will ensure your home is protected from water leaks, lower energy costs, and even prevent draughts. It's a small cost to pay for your family's comfort and safety. Contact Thompson Creek Window to discuss your options regarding window seal replacement or repair. Our skilled professionals are here to help! We offer assistance to homeowners in the Mid-Atlantic region.
double glazing window repairs broken double-glazing seal can allow water to enter the space that is used for insulation. This water could cause fogging or misting in the window panes.
When you notice condensation forming in your home, it's time to contact a professional double glazing repair service. The condensation could be a sign that the vacuum seal made by the factory failed and water has gotten into the enclosed space.
Condensation can be caused by a number of factors but it is typically the result of defective gaskets or sealants, or insulation in the uPVC frame of the windows. As a result, there are a few different double glazing repair options but it is essential that the seal you choose to replace is properly designed to ensure the perfect fit and water-tight seal.
Gaskets are typically composed of polyurethane, which is a material that could be used to fill in gaps between double-glazed units. These are designed to be long-lasting but they can perish in time because of wear and tear and exposure to different temperatures and weather conditions throughout the year.
As time passes the foam will shrink or crack over time. This can cause cracks in your seal, allowing moisture to seep into the double-glazed window. This can result in condensation and a loss in energy efficiency.
One solution to this problem is to have the windows resealed. This is not a sure fix as it will only remove the existing condensation, and not address the underlying problems that are causing the double-glazed window to leak or form condensate.
A professional who can offer an insurance-backed warranty should replace your windows completely. If the company fails, you're still protected by insurance. It's worth mentioning that the warranty on your replacement windows must be a minimum of 10 years.
Misting
As autumn draws nearer it's a good idea to ensure that your double-glazing seals are in good condition. Worn-out window seals don't just affect the insulation properties of your windows, but can also lead to condensation, mold, and damp. It is essential to address any issues with your double-glazed windows as quickly as you can to prevent further damage and save on energy bills.
A standard double glazed window is constructed from two panes of glass connected by an internal space that's filled with gas. The outer sealant layer fills the gap between uPVC frames and the glass. This is vital to ensure the airtight seal that keeps cold and warm air from your home, saving you the cost of heating. Unfortunately, over time these seals may be damaged due to aging and weather conditions, or poor installation. The encapsulation formula that makes double glazed windows so efficient can start to degrade once this occurs.
If not checked leaks, damaged seals, or other issues could lead to damp and condensation which can not only affect the appearance of your windows, but could also affect your health. The dampness and moisture can cause damage to ceilings, walls flooring, floors and other surfaces in your home. They also create allergens and irritants that can be detrimental to your health and the health of your family members.
One of the most frequent problems that can happen to your double glazing is that it can leak between the panes. This occurs when moisture is able to get into the insulated part of your window and is difficult to fix without professional double glazing seal repair.
There are DIY methods of tackling this issue, however, we'd recommend against this as it's not only risky but also very dirty and damage your windows. These methods involve drilling holes in your glazed units and using chemicals to eliminate the fog and condensation. This could cause a number of issues, including exposing your windows and units to water damage.
Professional glaziers have the tools, skills and experience necessary to safely reseal uPVC frames. They can also offer you long-lasting results. They can also offer tips on how to keep your uPVC window in good condition to avoid any future issues.
Draughts
A draft coming from your window is an indication that the sealant has failed and must be replaced or repaired. This will stop cold air from getting into your home. It will also improve the efficiency of your energy, reduce heating bills, and increase comfort.
It is also important to note that not all draughts originate from the window seals but rather from the gap between the frame and bricks. In certain cases, it could be possible to fix this by simply caulking the gap. If this is not successful, the area will require resealing professionally.
When the sealant on double-glazed windows begins to fail and allows water to infiltrate. This can lead to dampness or even mold. This could cause harm to health and can cause damage to the property. It is essential to address any water leaks as soon as you spot them. And if your windows are still covered by a guarantee, it is worth checking with the company you purchased them from, since they could pay for the repairs.
The windows themselves are typically covered by a warranty that can be a minimum of 10 years, but certain businesses offer lifetime warranties - therefore it is worthwhile looking into this information. If your double-glazed windows are under warranty, it's worth contacting the company you purchased them from as soon as possible and providing them with details of any issues that you're having. Ideally, it is best to make this contact in person, or via email and letter, so everything is documented and clear.
It is also worth noting that draughts are often caused by defective hinges rather than an ineffective seal. The hinges cover the window sash which is the part you open. If they're not regularly oiling them they could become stiff. This could cause a gap develop between the frame of the sash and the sash, which allows cold air to enter the home. Replacing the hinges can solve this issue, without affecting window seals.